New pages
Jump to navigation
Jump to search
- 09:14, 16 March 2024 Badmailto (hist | edit) [406 bytes] Ebroch (talk | contribs) (Created page with "<u>'''badmailto'''</u> Note, badmailto applies to both incoming and outgoing messages. man '''qmail-smtpd''' excerpt: Unacceptable envelope recipient addresses. '''qmail-smtpd''' will reject every recipient address for a message if the recipient address is listed in, or matches a POSIX regular expression pattern listed in, badmailto. For more information, please have a look at README.qregex.")
- 09:05, 16 March 2024 Badmailfromnorelay (hist | edit) [315 bytes] Ebroch (talk | contribs) (Created page with "<u>'''badmailfromnorelay'''</u> man '''qmail-smtpd''' excerpt: Functions the same as badmailfrom control file but [http://www.pokerenfrancais.eu/chilipoker-review/ chilipoker]is read only if the '''RELAYCLIENT''' environment variable is not set. For more information, please have a look at README.qregex.")
- 09:04, 16 March 2024 Badmailfrom (hist | edit) [451 bytes] Ebroch (talk | contribs) (Created page with "<u>'''badmailfrom'''</u> man '''qmail-smtpd''' excerpt: Unacceptable envelope sender addresses. '''qmail-smtpd''' will reject every recipient address for a message if the envelope sender address is listed in, or matches a POSIX regular expression pattern listed in, <u>badmailfrom</u>. A line in <u>badmailfrom</u> may be of the form @<u>host</u>, meaning every address at <u>host</u>. For more information, please have a look at README.qregex.")
- 09:04, 16 March 2024 Badloadertypes.cdb (hist | edit) [607 bytes] Ebroch (talk | contribs) (Created page with "<u>'''badloadertypes.cdb'''</u> man '''qmail-smtpd''' excerpt: Unacceptable base64 encoded LOADER types in message. '''qmail-smtpd''' will reject every message if 5 significant characters (e.g. Mi5kb) in any of it's embedded base64 attachments is identical with one compiled into <u>badloadertypes.cdb</u>. Use '''qmail-badloader-types''' to derive <u>badloadertypes.cdb</u> from <u>badloadertypes</u>. The control file <u>badloadertypes.cdb</u> is evaluated if the enviro...")
- 09:03, 16 March 2024 Badhelo (hist | edit) [429 bytes] Ebroch (talk | contribs) (Created page with "<u>'''badhelo'''</u> man '''qmail-smtpd''' excerpt: Unacceptable HELO/EHLO host names. '''qmail-smtpd''' will reject every recipient address for a message if the host name is listed in, or matches a POSIX regular expression pattern listed in, <u>badhelo</u>. If the '''NOBADHELO''' environment variable is set, then the contents of <u>badhelo</u> will be ignored. For more information, please have a look at README.qregex.")
- 23:45, 15 March 2024 Virtualdomains (hist | edit) [1,110 bytes] Ebroch (talk | contribs) (Created page with "<u>'''virtualdomains'''</u> man '''qmail-send''' excerpt: List of virtual users or domains, one per line. A virtual user has the form <u>user</u>'''@'''<u>domain</u>:<u>prepend</u>, without any extra spaces. When '''qmail-send''' sees the recipient address <u>user</u>'''@'''<u>domain</u>, it converts it to <u>prepend</u>-<u>user</u>'''@'''<u>domain</u> and treats it as local. A virtual domain has the form <u>domain</u>:<u>prepend</u>. It applies to any recipient addr...")
- 23:45, 15 March 2024 Tlshosts/FQDN.pem (hist | edit) [920 bytes] Ebroch (talk | contribs) (Created page with "<u>'''tlshosts/FQDN.pem'''</u> man '''qmail-remote''' excerpt: '''qmail-remote''' requires TLS authentication from servers for which this certificate exists ('''FQDN''' is the fully-qualified domain name of the server). One of the <u>dNSName</u> or the <u>CommonName</u> attributes have to match. '''WARNING:''' this option may cause mail to be delayed, bounced, doublebounced, or lost.")
- 23:44, 15 March 2024 Tlshosts/exhaustivelist (hist | edit) [388 bytes] Ebroch (talk | contribs) (Created page with "<u>'''tlshosts/exhaustivelist'''</u> man '''qmail-remote''' excerpt: If this file exists no TLS will be tried on hosts other than those for which a file '''tlshosts/FQDN.pem''' exists.")
- 23:44, 15 March 2024 Tlsclientciphers (hist | edit) [3,533 bytes] Ebroch (talk | contribs) (Created page with "<u>'''tlsclientciphers'''</u> man '''qmail-remtote''' excerpt: A set of OpenSSL client cipher strings. Multiple ciphers contained in a string should be separated by a colon.")
- 23:44, 15 March 2024 Notlshosts/FQDN (hist | edit) [567 bytes] Ebroch (talk | contribs) (Created page with "<u>'''notlshosts/FQDN'''</u> man '''qmail-remote''' excerpt: '''qmail-remote''' will not try TLS on servers for which this file exists ('''FQDN''' is the fully-qualified domain name of the server). (tlshosts/FQDN.pem takes precedence over this file however).")
- 23:43, 15 March 2024 Clientcert.pem (hist | edit) [418 bytes] Ebroch (talk | contribs) (Created page with "<u>'''clientcert.pem'''</u> Note, this file needs to contain the private key in addition to the SSL certificate. The CA chain might be required as well. man '''qmail-remote''' excerpt: SSL certificate that is used to authenticate with the remote server during a TLS session.")
- 23:42, 15 March 2024 Smtproutes (hist | edit) [3,086 bytes] Ebroch (talk | contribs) (Created page with "<u>'''smtproutes'''</u> This option can be very useful when sending email to flaky or large domains. As an example, we send a lot of email to sympatico.ca users, and they are always making changes to their DNS, which sometimes cause CNAME lookup failure errors on our mail server. To get around this, I did a 'dig' of their domain for MX records, and got this: ANSWER SECTION: sympatico.ca. 59 IN MX 5 toip4.bellnexxia.net. sympatico.ca....")
- 23:41, 15 March 2024 Helohost (hist | edit) [273 bytes] Ebroch (talk | contribs) (Created page with "<u>'''helohost'''</u> man '''qmail-remote''' excerpt: Current host name, for use solely in saying hello to the remote SMTP server. Default: me, if that is supplied; otherwise '''qmail-remote''' refuses to run.")
- 23:41, 15 March 2024 Timeoutremote (hist | edit) [227 bytes] Ebroch (talk | contribs) (Created page with "<u>'''timeoutremote'''</u> man '''qmail-remote''' excerpt: Number of seconds '''qmail-remote''' will wait for each response from the remote SMTP server. Default: 1200.")
- 23:41, 15 March 2024 Timeoutconnect (hist | edit) [283 bytes] Ebroch (talk | contribs) (Created page with "<u>'''timeoutconnect'''</u> man '''qmail-remote''' excerpt: Number of seconds '''qmail-remote''' will wait for the remote SMTP server to accept a connection. Default: 60. The kernel normally imposes a 75-second upper limit.")
- 23:40, 15 March 2024 Taps (hist | edit) [1,124 bytes] Ebroch (talk | contribs) (Created page with "<u>'''taps'''</u> This file contains email archiving instructions-also known as tap/tapping. The ''taps'' file (empty, 0-byte file) is not included in the basic, default toaster install. The '''tap-patch''' is in the toaster package, however...you just need to configure it by: # touch /var/qmail/control/taps # vi /var/qmail/control/taps insert tap info and save. Examples: a) To tap a whole domain add a line like: .*@domain.com:joe@example.com ---'joe' gets a copy o...")
- 23:40, 15 March 2024 Qmqpservers (hist | edit) [223 bytes] Ebroch (talk | contribs) (Created page with "<u>'''qmqpservers'''</u> man '''qmail-qmqpc''' excerpt: IP addresses of QMQP servers, one address per line. '''qmail-qmqpc''' will try each address in turn until it establishes a QMQP connection or runs out of addresses.")
- 23:39, 15 March 2024 Defaultdelivery (hist | edit) [391 bytes] Ebroch (talk | contribs) (Created page with "<u>'''defaultdelivery'''</u> Value of default local delivery folder. Qmail-Toaster default is "./Maildir/" (without the quotes). Mail is thus delivered to the '''/home/vpopmail/domains/<domainname>/<username>/Maildir/new''' directory. This value is passed by '''qmail-start''' to '''qmail-lspawn''' via the '''/var/qmail/rc''' script. Note, this value should '''not''' end with a newline.")
- 23:39, 15 March 2024 Plusdomain (hist | edit) [547 bytes] Ebroch (talk | contribs) (Created page with "<u>'''plusdomain'''</u> man '''qmail-inject''' excerpt: Plus domain name. Default: me, if that is supplied; otherwise the literal name '''plusdomain''', which is probably not what you want. '''qmail-inject''' adds this name to any host name that ends with a plus sign, including defaulthost if defaulthost ends with a plus sign. If a host name does not have dots but ends with a plus sign, '''qmail-inject''' uses <u>plusdomain</u>, not defaultdomain. The...")
- 23:38, 15 March 2024 Idhost (hist | edit) [526 bytes] Ebroch (talk | contribs) (Created page with "<u>'''idhost'''</u> man '''qmail-inject''' excerpt: Host name for Message-IDs. Default: me, if that is supplied; otherwise the literal name '''idhost''', which is certainly not what you want. <u>idhost</u> need not be the current host's name. For example, you may prefer to use fake host names in Message-IDs. However, <u>idhost</u> must be a fully-qualified name within your domain, and each host in your domain should use a different <u>idhost</u>. The '''QMAILIDHO...")