New pages

10:10, 16 March 2024 ‎Clamav (hist | edit) ‎[6,677 bytes] ‎Ebroch (talk | contribs) (Created page with "== About ClamAV == From: [http://www.clamav.net Clamav.net] ClamAV is an open source (GPL) antivirus engine designed for detecting Trojans, viruses, malware and other malicious threats. It is the de facto standard for mail gateway scanning. It provides a high performance mutli-threaded scanning daemon, command line utilities for on demand file scanning, and an intelligent tool for automatic signature updates. The core ClamAV library provides numerous file format detect...")
10:09, 16 March 2024 ‎Domainkeys (hist | edit) ‎[16,586 bytes] ‎Ebroch (talk | contribs) (Created page with "= Introduction = What are DomainKeys? See [http://antispam.yahoo.com/domainkeys Yahoo!'s DomainKeys page] for an explaination and further resources. This is a step by step guide for setting up DomainKeys on QmailToaster. It includes modifications needed to DNS. This guide assumes you have installed QmailToaster and have created at least one domain. The example name for your domain used throughout this guide is ''yourdomain.com''. The example DomainKey Selector name (...")
10:09, 16 March 2024 ‎Spamdyke (hist | edit) ‎[5,632 bytes] ‎Ebroch (talk | contribs) (Created page with "== Background == Spamdyke provides pre-transmission spam filtering, and should be used in addition to SpamAssassin, which provides post-transmission spam filtering. Spamdyke is available from [http://www.spamdyke.org/ the spamdyke website]. See that site for details. While a few of spamdyke's capabilities are already provided with the stock QMail-Toaster, spamdyke provides some additional spam fighting capabilities such as graylisting and enhanced blacklist/whitelist pr...")
10:08, 16 March 2024 ‎SPF (hist | edit) ‎[9,308 bytes] ‎Ebroch (talk | contribs) (Created page with "How to set up SPF on my Qmailtoaster : Erik Espinoza 01:15, 11 Sep 2005 (PDT) : Dan McAllister 16:33, 28 November 2008 (EST) '''What is SPF''' SPF is a tool used to defend against SPAM -- unwanted email messages. Originally named "Sender Permitted From", the re-named "Sender Policy Framework" was created in 2003, and is an attempt to identify and control one specific type of SPAM: ''forged'' messages. A ''forged'' email message is one that purports to be from...")
10:08, 16 March 2024 ‎RBLs (hist | edit) ‎[3,285 bytes] ‎Ebroch (talk | contribs) (Created page with "A DNS-based Blackhole List (DNSBL, also known as Real-time Blackhole List or RBL), is a means by which an Internet site may publish a list of IP addresses in a format that can be easily queried by mail servers on the Internet. These addresses are those of known spammers or open relays, which are places from which you do not want to receive email. If an email comes from one of these addresses, it can be rejected as spam. There is a [http://en.wikipedia.org/wiki/DNSBL#DNSB...")
10:08, 16 March 2024 ‎Chkuser (hist | edit) ‎[1,214 bytes] ‎Ebroch (talk | contribs) (Created page with "chkuser configuration is not configurable on the fly. Configuration settings currently in use are documented at /var/qmail/doc/chkuser_settings.h. To tailor your chkuser settings, use the following procedure (provided by Nick): # rpm -Uvh qmail-toaster*.src.rpm # cd /usr/src/redhat/SPECS (assuming you are using CentOS 4) edit qmail-toaster.spec. find 'sleep 5' (should be line 606). change 5 to 300 (5 seconds to 300 seconds). save. # rpmbuild -bb --with cnt40 q...")
10:02, 16 March 2024 ‎Tlsserverciphers (hist | edit) ‎[258 bytes] ‎Ebroch (talk | contribs) (Created page with "'''tlsserverciphers''' man '''qmail-smtpd''' excerpt: A set of OpenSSL cipher strings. Multiple ciphers contained in a string should be separated by a colon. If the environment variable '''TLSCIPHERS''' is set to such a string, it takes precedence.")
10:01, 16 March 2024 ‎Tlsclients (hist | edit) ‎[324 bytes] ‎Ebroch (talk | contribs) (Created page with "'''tlsclients''' man '''qmail-smtpd''' excerpt: A list of email addresses. When relay rules would reject an incoming messages, '''qmail-smtpd''' can allow it if the client presents a certificate that can be verified against the CA list in clientca.pem and the certificate email address is in tlsclients.")
10:01, 16 March 2024 ‎Timeoutsmtpd (hist | edit) ‎[177 bytes] ‎Ebroch (talk | contribs) (Created page with "'''timeoutsmtpd''' man '''qmail-smtpd''' excerpt: Number of seconds '''qmail-smtpd''' will wait for each new buffer of data from the remote SMTP client. Default: 1200.")
10:00, 16 March 2024 ‎Spfrules (hist | edit) ‎[618 bytes] ‎Ebroch (talk | contribs) (Created page with "'''spfrules''' man '''qmail-smtpd''' modified excerpt: You can add a single line with SPF rules (also known as SPF mechanisms) that will be checked before other SPF rules would fail. This can be used to always allow certain machines to send certain emails. As an example, an spfrules file that contains the line '''ip4:192.0.0.1/24''' would allow the local qmail-toaster to receive Email from one of its supported domains from any host with the ip addresses 192.0....")
10:00, 16 March 2024 ‎Spfguess (hist | edit) ‎[205 bytes] ‎Ebroch (talk | contribs) (Created page with "'''spfguess''' man '''qmail-smtpd''' excerpt: You can add a line with SPF rules that will be checked if a sender domain doesn't have an SPF record. The local rules will also be used in this case.")
09:59, 16 March 2024 ‎Spfexp (hist | edit) ‎[217 bytes] ‎Ebroch (talk | contribs) (Created page with "'''spfexp''' man '''qmail-smtpd''' excerpt: You can add a line with an SPF explanation that will be shown to the sender in case of a reject. It will override the default one. You can use SPF macro expansion.")
09:59, 16 March 2024 ‎Spfbehavior (hist | edit) ‎[1,020 bytes] ‎Ebroch (talk | contribs) (Created page with "'''spfbehavior''' - Set to a value between 1 and 6 to enable SPF checks: * '''0''' to disable. * '''1''' selects ’annotate-only’ mode, where ''qmail-smtpd'' will annotate incoming email with ''Received-SPF'' fields, but will not reject any messages. * '''2''' will produce temporary failures on DNS lookup problems so you can make sure you always have meaningful Received-SPF headers. * '''3''' selects ’reject’ mode, where incoming mail will be rejected if...")
09:58, 16 March 2024 ‎Smtpgreeting (hist | edit) ‎[214 bytes] ‎Ebroch (talk | contribs) (Created page with "'''smtpgreeting''' - SMTP greeting message. Default: me, if that is supplied; otherwise '''qmail-smtpd''' will refuse to run. The first word of smtpgreeting should be the current host’s name.")
09:58, 16 March 2024 ‎Servercert.pem (hist | edit) ‎[344 bytes] ‎Ebroch (talk | contribs) (Created page with "'''servercert.pem''' If this file is absent, smtp TLS processing will be disabled. man '''qmail-smtpd''' excerpt: SSL certificate to be presented to clients in TLS-encrypted sessions. Should contain both the certificate and the private key. Certifying Authority (CA) and intermediate certificates can be added at the end of the file.")
09:58, 16 March 2024 ‎Rsa512.pem (hist | edit) ‎[179 bytes] ‎Ebroch (talk | contribs) (Created page with "'''rsa512.pem''' man '''qmail-smtpd''' excerpt: If this 512 bit RSA key is provided, '''qmail-smtpd''' will use it for TLS sessions instead of generating one on-the-fly.")
09:57, 16 March 2024 ‎Rcpthosts (hist | edit) ‎[1,309 bytes] ‎Ebroch (talk | contribs) (Created page with "'''rcpthosts''' This file contains all of the domains your server will accept mail for. Using the VqAdmin interface or the command line tools will automatically add the domains you create to this file. This is where you want to put domain names that you want to be a secondary mail server for. '''Do not add the domains or users if you want to be a caching email server.''' If you add a domain here that does not reside on your server, the machine will accept the...")
09:57, 16 March 2024 ‎Queuelifetime (hist | edit) ‎[721 bytes] ‎Ebroch (talk | contribs) (Created page with "'''queuelifetime''' This file defines how long your server will attempt to process or deliver an email before bouncing it to the originating sender defined in the header of the email message. The value in this file must be in seconds. Once the maximum time has been met the message will bounce, with the new sender being defined in bouncefrom and coming from the domain defined in bouncehost. The default for Qmail-Toaster is 86400 (one day). man '''qma...")
09:56, 16 March 2024 ‎Percenthack (hist | edit) ‎[382 bytes] ‎Ebroch (talk | contribs) (Created page with "'''percenthack''' man '''qmail-send''' excerpt: List of domain names where the percent hack is applied. If domain is listed in percenthack, any address of the form user%fqdn@domain is rewritten as user@fqdn. user may contain %, so the percent hack may be applied repeatedly. '''qmail-send''' handles percenthack before locals.")
09:56, 16 March 2024 ‎Morercpthosts (hist | edit) ‎[417 bytes] ‎Ebroch (talk | contribs) (Created page with "'''morercpthosts''' man '''qmail-smtpd''' excerpt: Extra allowed RCPT domains. If rcpthosts and morercpthosts both exist, morercpthosts is effectively appended to rcpthosts. You must run '''qmail-newmrh''' whenever morercpthosts changes. Rule of thumb for large sites: Put your 50 most commonly used domains into rcpthosts, and the rest into morercpthosts.")

New pages

Navigation menu

Search