MediaWiki API result
This is the HTML representation of the JSON format. HTML is good for debugging, but is unsuitable for application use.
Specify the format parameter to change the output format. To see the non-HTML representation of the JSON format, set format=json.
See the complete documentation, or the API help for more information.
{
"batchcomplete": "",
"continue": {
"lecontinue": "20240330074836|184",
"continue": "-||"
},
"query": {
"logevents": [
{
"logid": 194,
"ns": 0,
"title": "Increase LV vm size",
"pageid": 189,
"logpage": 189,
"revid": 1061,
"params": {},
"type": "create",
"action": "create",
"user": "Ebroch",
"timestamp": "2024-04-16T04:24:28Z",
"comment": "Created page with \"Proxmox - Increase VM Disk Size Posted Oct 1, 2016 By harryvasanth 9 min read Steps These are the steps to increase the disk size of the VMs in Proxmox Add new disk in Proxmox VE UI Partition the new disk Create a new physical device (using pvcreate) Extend the existing volume group Extend the logical volume Extend the file system (ext4 in my case) Check current storage First lets check how much space left on the VM: root@jupyterhub:~# df -h Filesystem...\""
},
{
"logid": 193,
"ns": 0,
"title": "Extract Packages from RPM",
"pageid": 188,
"logpage": 188,
"revid": 1049,
"params": {},
"type": "create",
"action": "create",
"user": "Ebroch",
"timestamp": "2024-04-15T22:15:25Z",
"comment": "Created page with \" # wget http://repo.qmailtoaster.com/8/spl/sqlmd/mariadb/testing/x86_64/qmail-1.03-3.3.7.qt.md.el8.x86_64.rpm List all packages in .rpm file # rpm -lqp qmail-1.03-3.3.7.qt.md.el8.x86_64.rpm # rpm -lqp qmail-1.03-3.3.9.qt.md.el8.x86_64.rpm |grep qmail-s /var/qmail/bin/qmail-send /var/qmail/bin/qmail-showctl <span style=\"color:red\">/var/qmail/bin/qmail-smtpd</span> /var/qmail/bin/qmail-start /var/qmail/man/cat5/qmail-spamt.0.bz2 /var/qmail/man/cat5/qmail-spamthro...\""
},
{
"logid": 192,
"ns": 0,
"title": "Qmail LDAP Authentication",
"pageid": 187,
"logpage": 187,
"revid": 1008,
"params": {},
"type": "create",
"action": "create",
"user": "Ebroch",
"timestamp": "2024-04-14T16:41:14Z",
"comment": "Created page with \"# wget https://raw.githubusercontent.com/qmtoaster/source/main/qldapauth.c # gcc -o qdovauth qdovauth.c # mv qdovauth /home/vpopmail/bin # chown vpopmail:vchkpw /home/vpopmail/bin/qdovauth # chmod 755 /home/vpopmail/bin/qdovauth Add services to Dovecot configuration file service stats { unix_listener stats-reader { user = vpopmail group = vchkpw mode = 0660 } unix_listener stats-writer { user = vpopmail group = vchkpw mode = 0660...\""
},
{
"logid": 191,
"ns": 0,
"title": "Qmail Dovecot Authentication",
"pageid": 186,
"logpage": 186,
"revid": 999,
"params": {},
"type": "create",
"action": "create",
"user": "Ebroch",
"timestamp": "2024-04-12T07:01:16Z",
"comment": "Created page with \"To authenticate against Dovecot instead of vpopmail download and compile [[https://raw.githubusercontent.com/qmtoaster/source/main/qdovauth.c this]] file\""
},
{
"logid": 190,
"ns": 0,
"title": "Qmqpd",
"pageid": 185,
"logpage": 185,
"revid": 944,
"params": {},
"type": "create",
"action": "create",
"user": "Ebroch",
"timestamp": "2024-04-04T05:20:12Z",
"comment": "Created page with \"<pre> QMQP is a protocol designed to be used by clients for queuing messages to a smart host that handles the delivery. This relieves clients of the burden of maintaining a queue and retrying temporarily undeliverable messages. The protocol is defined at http://cr.yp.to/proto/qmqp.html. QMQP is similar to QMTP in that it minimizes the round trips necessary for handing messages to servers, but it doesn't implement relay control\u2014so access to QMQP servers must be restrict...\""
},
{
"logid": 189,
"ns": 0,
"title": "Fail2Ban",
"pageid": 0,
"logpage": 82,
"params": {},
"type": "delete",
"action": "delete",
"user": "Ebroch",
"timestamp": "2024-03-31T14:41:39Z",
"comment": "content was: \"'''Basic fail2ban installation and setup''' ---- == Installation == Install EPEL Repos * For CentOS 5 i386: # rpm -Uvh http://download.fedora.redhat.com/pub/epel/5/i386/epel-release-5-4.noarch.rpm * For CentOS 4: # rpm -Uvh http://download.fedora.redhat.com/pub/epel/4/i386/epel-release-4-10.noarch.rpm Instal fail2ban: # yum install fail2ban == Setup == To wor...\", and the only contributor was \"[[Special:Contributions/Ebroch|Ebroch]]\" ([[User talk:Ebroch|talk]])"
},
{
"logid": 188,
"ns": 0,
"title": "SOGo",
"pageid": 184,
"logpage": 184,
"revid": 834,
"params": {},
"type": "create",
"action": "create",
"user": "Ebroch",
"timestamp": "2024-03-30T17:45:32Z",
"comment": "Created page with \"[[Groupware|Back]]<br>\""
},
{
"logid": 187,
"ns": 0,
"title": "Qmail-greyd",
"pageid": 183,
"logpage": 183,
"revid": 811,
"params": {},
"type": "create",
"action": "create",
"user": "Ebroch",
"timestamp": "2024-03-30T16:59:41Z",
"comment": "Created page with \"#!/usr/bin/python # Before running this script make sure to have done : # mkdir /var/qmail/grey # chown qmaild.nofiles /var/qmail/grey # test with env TCPREMOTEIP=\"127.0.0.1\" GREY=\"\" ./greyd /bin/bash -c env | grep RB # and do not forget to delete the folder and file created before going in production # Design similar to http://www.jonatkins.com/page/software/qgreylist import os import sys import time minute = 60 hour = 60*60 day = 60*60*24 # Configuration start con...\""
},
{
"logid": 186,
"ns": 0,
"title": "AWS",
"pageid": 182,
"logpage": 182,
"revid": 790,
"params": {},
"type": "create",
"action": "create",
"user": "Ebroch",
"timestamp": "2024-03-30T07:56:41Z",
"comment": "Created page with \" 1. AWS cloud backup Install AWS pkgs on mail server (once) a. # yum install awscli awstats Configure keys from your AWS account on mail server (once) b. # aws configure From mail server create AWS bucket for backup (once) c. # aws s3 mb s3://my-bucket --region us-west-1 Synchronize mail store to AWS d. # aws s3 sync /home/vpopmail/domains/mydomain.com s3://my-bucket/mydomain.com\""
},
{
"logid": 185,
"ns": 0,
"title": "Collaboration (RTC)",
"pageid": 181,
"logpage": 181,
"revid": 789,
"params": {},
"type": "create",
"action": "create",
"user": "Ebroch",
"timestamp": "2024-03-30T07:54:29Z",
"comment": "Created page with \" 1. Openfire Collaboration a. # yum -y install java-1.7.0-openjdk libstdc++ b. # wget -O openfire-*.rpm http://www.igniterealtime.org/downloadServlet?filename=openfire/openfire-*.rpm c. # yum -y localinstall openfire-*.rpm d. Open firewall #!/bin/sh for port in 5222 5223 7070 7443 5269 5275 5276 5262 5263 9090 9091 7777 5229 do echo -n \"Opening port: $port : \" tput setaf 2 firewall-cmd --zone=public --add-port=$port/tcp --permanen...\""
}
]
}
}